Catalog
- Aerial Bundled Conductor
- ABC accessories
0210 ABC tap connectors 0211 ABC tap connectors - versions 0212 ABC tap connectors - versions with side covers 0221 ABC tension clamps for dead ends and angular strainings 0222 ABC tension clamps 0231 ABC suspension clamps 0233 ABC supension clamps, rigid 0234 ABC suspension clamps, rigid 0241 LV-network switch for HRC fuses NH00 4-pole 0242 LV network switch for HRC fuses NH 00 1-pole 0243 LV-network switch for HRC fuses NH 00, single-pole, 2-channel output 0244 ABC switch set, single-pole, tension free 0245 ABC switch NH 00 single pole, with earthing device 0246 accessories for LV-network switch NH-00 0251 LV-network switch for HRC fuses NH1-2, single pole 0252 accessories for LV-network switch NH 1-2 0260 ABC tap-off fuses 0261 ABC tap-off fuse holder 0271 ABC terminal for arresters 0272 surge arresters for low voltage systems (280 V) 0274 weak link 0279 tools for ABC mounting
- Bare conductors and earthing ropes
- Low voltage and medium voltage cable
- Cable accessories
- Safety equipment for electrical works
- Solar energy cables
ABC tension clamps
ABC tension clamps for dead ends and angular strainings
layout
– The four conductors are fed through
separate clamp channels.
– The wedgetype clamp is self-adjusting.
– Maximum tensile stress and breaking
strength of the clamp are in accordance
with DIN VDE 0211 (2.5 times safety).
– Pilot wire and street lighting
conductors are not gripped by the clamp, they are led alongside the clamp.
– The four conductors are fed through
separate clamp channels.
– The wedgetype clamp is self-adjusting.
– Maximum tensile stress and breaking
strength of the clamp are in accordance
with DIN VDE 0211 (2.5 times safety).
– Pilot wire and street lighting
conductors are not gripped by the clamp, they are led alongside the clamp.
material
external body: steel, hot-galvanized
insert: fibreglass-reinforced plastic
external body: steel, hot-galvanized
insert: fibreglass-reinforced plastic
Versions for different Aerial Bundled Cables
1
The strain bow is flexible and made in one piece. During assembly, the clamping jaws open automatically for insertion of the ABC line.
The strain bow is flexible and made in one piece. During assembly, the clamping jaws open automatically for insertion of the ABC line.
2
The clamping body is pivoting.
The screw which is holding the clamp is secured against self opening.
The clamping body is pivoting.
The screw which is holding the clamp is secured against self opening.
3
Through the integrated spring the clamping jaws open automatically.
Through the integrated spring the clamping jaws open automatically.
| cross section | length | bolt Ø | min. breaking strength of clamp |
maximum continous load |
conductor Ø over insulation max.1 mm |
packing unit | |
|---|---|---|---|---|---|---|---|
| mm² | mm | mm | N/mm | mm | |||
1 |
|||||||
| 332354002 | 4 × 25–35 | 200 | 17.000 | 40 | 11,0 | 10 | |
2 |
|||||||
| 331210210 | 4 × 25–50 | 360 | 10 | 37.000 | 40 | 12,7 | 6 |
| 331210790 | 4 × 70–95 | 400 | 12 | 43.000 | 40 | 15,2 | 6 |
3 |
|||||||
| 331212001 | 4 × 50–95 | 400 | 12 | 40.000 | 40 | 15,2 | 15 |