Catalog

NA2X2Y

Underground cable with XLPE insulation and HDPE sheath

Underground cable with XLPE insulation and HDPE sheath

Standard: DIN VDE 0276-603 (HD 603)
Design
1 Aluminium conductor, round solid (RE), sector-shaped solid (SE), round stranded (RM), resp. sector-shaped (SM)
2 Core insulation (XLPE)
3 Inner covering (EPDM)
4 Sheath (HDPE black, UV-resistant)
Application
Power distribution cables in power stations, industrial installation and switchgears, as well as in local mains.
For fixed installation underground, in interior premises, cable ducts, in the open air and in water – as permitted by the local building regulations – under severe mechanical stress during installation and operation.
Technical Data
Rated voltage: kV 0.6/1
Test voltage: kV/Hz 4/50
Laying temperature: °C min. -20
Operating temperature: °C -50 up to +90
Conductor temperature: °C max. +90
Short-circuit temperature: °C/s max. +250 /5
Core identifikation:   HD 308 52
Bending radius (mind.) mm 12x Ø of cable

NA2X2Y

Underground cable with XLPE insulation and HDPE sheath

no. of cores
x nom. cross
section		 max.
conductor
resistance		 current
rating
in the ground		 current
rating
in the air 1)		 outer
diameter		 AL-
number
 total
weight
 
mm²
Ohm/km
A
A		 appr.
mm		 appr.
kg/km		 appr.
kg/km
200901 NA2X2Y 4 × 25 RE 1,200 112 92 25,5 290 730
200902 NA2X2Y 4 × 25 RM 1,200 112 92 26,7 290 748
200903 NA2X2Y 4 × 35 RE 0,868 135 112 27,8 406 882
200904 NA2X2Y 4 × 35 RM 0,868 135 112 29,3 406 939
200905 NA2X2Y 4 × 50 SE 0,641 158 133 31,9 580 910
200906 NA2X2Y 4 × 50 SM 0,641 158 133 34,4 580 1.006
200907 NA2X2Y 4 × 70 SE 0,443 196 169 36,1 812 1.276
200908 NA2X2Y 4 × 70 SM 0,443 196 169 38,0 812 1.335
200909 NA2X2Y 4 × 95 SE 0,320 234 205 40,3 1.102 1.631
200910 NA2X2Y 4 × 95 SM 0,320 234 205 43,0 1.102 1.684
200911 NA2X2Y 4 × 120 SE 0,253 268 239 43,5 1.392 1.944
200912 NA2X2Y 4 × 120 SM 0,253 268 239 46,6 1.392 2.035
200913 NA2X2Y 4 × 150 SE 0,206 300 271 47,7 1.740 2.432
200914 NA2X2Y 4 x 150 SM 0,206 300 271 50,4 1.740 2.573
200915 NA2X2Y 4 × 185 SE 0,164 342 314 52,7 2.146 3.099
200916 NA2X2Y 4 × 185 SM 0,164 342 314 57,0 2.146 3.254
200917 NA2X2Y 4 × 240 SE 0,125 398 372 58,2 2.784 3.863
200918 NA2X2Y 4 × 240 SM 0,125 398 372 63,2 2.784 4.044

→ Other cross-sections on request.

1) Basic rated current acc. to DIN VDE 276-603 (HD 603)

Technical values can change. No responsibility is therefore taken for correctness.